YET905A Wireless Doorbell control Kit - alice@szyet.com

Wireless Doorbell Control Kit

Function Features

1. Door bell and door lock control making life more convenient;

2. Rolling code technology adopted brings top security as automobile;

3. Compact digital touch screen;

4. Whole metallic keypad body, IPX-7 certified;

5. Alarm for low battery.

Package inlcuded:

1. Doorbell *1

2. Keypad*1

3. Remote control*2

4. Receiver*1

Tech data:

1.Doorbell:

※ AA x3                           

※ Static power consumption : 0.1mA              

※ Optional 30 ringtones  

※  Decode HS1527                    

※ 100db

2.Keypad

※  AA x4               

※  433.92MHZ/ASK                   

※  Dual codes HS1527 and HCS301       

※  Static power consumption: 0.1mA

3.Remote Control    

※ CR2016*2 

※ 433.92MHZ/ASK

※ Code HCS301

※ Static power consumption: 0

4.Receiver

※ 12VDC

※ 433.92MHZ/ASK

※ Decode HCS301  

※ Pulse output (3S)

Function Description

Operating instructions for the wireless doorbell:

1. Press down the learning (Play) button on the doorbell (for about 2s) and

then the LED light on the right side turns on; next, release the button to enter

into learning status.

2. Press down the Doorbell button on the password keyboard untill the LED

light twinkles for three times, indicating the learning is completed successfully.

3. Long press the Play button for about 7s untill the LED light turns off to eliminate all codes.

4. Press down the Doorbell button on the password keyboard matched, then, the doorbell will alarm.

5. To adjust the volume and set to mute, please press the volume adjustment button.

6. To select different warning tones, please press the tone-selectin button.

7. To listen to the warning tone for test, please press the Play button.

Operating instructions for the controller:

This controller could be used to learn the password keyboard and wireless remote control at the same time ao as to make it controlled.                 

1. Methods and steps of learning and code clearing

Press down the Learn button on the controller and then release it after the LED light turns on, then, the controller enters the first-time learning status (now the LED light is off); next, press the button to be controlled on the remote control with the LED light always twinkling slowly, indicating the completion of the first time of learning. then press again the Learn button on the controller and release it after the LED light is on to enter the second-time learning status (the LED light is off); then, press down the same button on the remote control with the LED light off after blinking fast for five times, indicating the successful completion of the whole learning. Six types of these remote controls could be learned at most.

If the remote controls are lost and you want all of them to be disabled, please long press the Learn button (for over 8s) till the LED light turns off, and then the controller will clear the contents inside the memory automatically. To reuse them, learn again.

Operating instructions for the password keyPad:

1. The password is entered into the format of UUPP, in which UU refers to the user account and PP to the account password.

2. The initial password is 123456 and the user account is 00. 00 for the master administrator use.

3. If the information is entered correctly with the keyboard, the buzzer beeps once; if any mistake, it beeps twice.

4. If the password is entered correctly, the buzzer will give a long beep; and

then, the password keyboard sends a code of HCS301.

5. Press the doorbell button and send the code of 1527.

6. To restore to factory settings, please input *9#99#999#; to send the

password is required to match up with the receiving terminal again.

7. The feature of peep protection is provided for password input. The password

could be entered in the format of UUXXPPXX, in which XX could be random

numbers.

Master administrator operation:

1. Input Administrator password *00 Master admistartor's password(123456)#, when there is a beep heard, go to the next step.

2. Add or change the password (user group number: 00-21): *1#1#UUPP#.

3. Delete a single user (the master administrator cannot be deleted): *1#3#UU#.

4. Delete all passwords (the master administrator cannot be deleted): *1#5#.

User operation:

Change the password: *5#UUCP#NP#       CP: old password    NP: new password

Note: this product could give a warm prompt for low battery. When the total voltage of four batteries is less than 4.4V, the buzzer will beep for three times every minute to remind you to replace the batteries. 

Shenzhen Chungyao Technology Co.; Ltd

Shenzhen Yaoertai Technology Development Co.,Ltd

address: 6th Floor block 27,Lianchuang Technical Zone, Bulan Road, Longgang district, Shenzhen,P.R.China

zip code: 518119

Tel:86-755-89509951(Ext 8080)

contact person: alice zhou

phone/what's app: +86-18038019159

Email:alice@szyet.com